Explore our specialized clinical catheter line engineered for acute gastro-enterology, enteral nutrition, emergency decompression, and minimally invasive surgery. Supplied directly to Toronto hospital networks, ambulatory surgical centers, and medical distributors across Ontario.
In modern gastro-enterology and surgical critical care, the Levin’s tube (single-lumen nasogastric catheter) remains an indispensable diagnostic and therapeutic instrument. Engineered specifically for gastric decompression, aspiration of intestinal secretions, and short-term enteral administration, the structural integrity of the tube directly dictates clinical efficiency and patient compliance. As a primary manufacturer and global supplier supporting healthcare providers in Toronto and across North America, our manufacturing architecture integrates advanced polymer chemistry with precision extrusions.
Our Levin's tubes are fabricated using non-toxic, non-irritant, medical-grade polyvinyl chloride (PVC) and platinum-cured medical-grade silicone tubing (via our Ultrasil technical division). The plasticized compound undergoes rigorous extraction testing to confirm complete absence of phthalate leaching, satisfying stringent Health Canada and ISO 10993 biocompatibility requirements. Upon introduction through the nasopharyngeal tract, the material exhibits controlled thermoplastic softness, softening by approximately 15-20% at body core temperature. This reduces throat discomfort and mucosal pressure necrosis during extended postoperative gastric suctioning.
The distal end of our Levin’s tube is fully closed and rounded using radio-frequency thermal forming, eliminating sharp flash edges that could compromise delicate esophageal lining. To prevent mucosal adherence and fluid blockage under active suctioning, four lateral eyes are punched with micro-precision. These lateral ports are staggered elliptically along the distal lumen, balancing fluid entry velocity and ensuring uninterrupted gastrointestinal decompression even if one eye becomes transiently obstructed by particulate matter or thick secretions.
| French Size (Fr/Ch) | Outer Diameter (mm) | Standard Length (cm) | Color-Coded Funnel Connector | Radio-Opaque Line | Primary Application |
|---|---|---|---|---|---|
| Fr 06 / Fr 08 | 2.0 mm / 2.7 mm | 40 - 50 cm | Light Green / Blue | Continuous Barium Sulfate Line | Neonatal & Pediatric Enteral Access |
| Fr 10 / Fr 12 | 3.3 mm / 4.0 mm | 120 cm | Black / White | Continuous Barium Sulfate Line | Pediatric & Small Adult Decompression |
| Fr 14 / Fr 16 | 4.7 mm / 5.3 mm | 121 cm | Green / Orange | Full Length X-Ray Opaque Line | Standard Adult Gastric Aspiration & Feeding |
| Fr 18 / Fr 20 | 6.0 mm / 6.7 mm | 125 cm | Red / Yellow | Full Length X-Ray Opaque Line | High-Viscosity Lavage & Emergency Drainage |
Toronto is home to one of North America's most dense and sophisticated medical ecosystems, including world-renowned clinical research institutions under the University Health Network (UHN), Sunnybrook Health Sciences Centre, Mount Sinai Hospital, and specialized pediatric institutions like SickKids. Procuring high-performance gastrointestinal catheter disopsables tailored to regional hospital workflows is vital for maintaining operational efficiency.
In acute care and surgical trauma centers across downtown Toronto, rapid decompression of bowel distension is critical. Our Levin's tubes feature deep, indelible depth markings at 45, 55, 65, and 75 cm from the tip, enabling nursing staff to verify accurate anatomical positioning quickly without unnecessary fluoroscopic delays.
With an expanding elderly demographic in the Greater Toronto Area (GTA), nursing homes and extended rehabilitation care facilities require non-reactive catheters for continuous bolus or gravity enteral feeding. The universal stepped funnel connector guarantees tight, leak-proof coupling with standard enteral syringe tips and feed bag sets.
Providing safe enteral access to pediatric patients requires micro-calibrated tubing with ultra-soft tip geometries. Our small-bore Fr 06 and Fr 08 Levin's tubes are manufactured with zero flash lines to protect tender neonatal mucosa, featuring high-contrast radio-opaque lines for rapid low-dose X-ray verification.
The landscape of medical device procurement in Ontario has evolved rapidly. Hospital purchasing alliances (such as Plexxus and Mohawk Medbuy) increasingly prioritize supply chain transparency, dual-sourcing reliability, environmental responsibility, and direct OEM compliance over spot-market brokers. As a dedicated manufacturer supplying Toronto distributors, our production model directly addresses these key industry shifts:
In alignment with Canadian environmental protection measures and modern clinical guidelines, health authorities across Ontario are systematically phasing out toxic plasticizers. Our modern cleanroom extrusion lines utilize alternative non-DEHP plasticizers that retain optimal tube flex and clarity without posing bio-accumulation risks during prolonged contact with gastric fluid or enteral lipids.
Recent global supply disruptions exposed vulnerabilities in single-source procurement models. By maintaining massive raw material reserves, automated high-speed extrusion machinery, and standardized batch production, our factory offers Toronto medical suppliers guaranteed order fulfillment lead times and stable unit pricing for multi-year supply contracts.
Disposables delivered to Canadian logistics hubs must withstand severe freeze-thaw cycles during transit without suffering polymer embrittlement. Our high-grade PVC and silicone blends undergo low-temperature impact testing to ensure zero micro-cracking or structural degradation when stored in cold warehouse environments prior to hospital deployment.
For more than six decades, our group has stood at the forefront of disposable medical device design, clinical manufacturing, and global export. Spanning across specialized divisions including medical devices, surgical dressings, and high-purity Ultrasil silicone tubing, our integrated operations guarantee total quality control from raw resin compound to final sterile packaging.
All extrusion, eye-punching, distal forming, and primary pouching take place in certified ISO Class 8 (Class 100,000) controlled environment cleanrooms with continuous differential pressure and airborne particulate monitoring.
Sterilization is executed in-house using validated Ethylene Oxide (EO) cycles adhering to ISO 11135 norms. Every pouch is stamped with chemical indicators, lot codes, and expiration dates for complete bedside traceability.
We provide comprehensive OEM and private label manufacturing for Canadian brand owners, including customized sheath packaging, custom multi-lingual Instructions for Use (IFU), and market-specific barcode labeling.
All our manufacturing facilities are fully audited and certified under ISO 13485:2016 and ISO 9001 quality management systems. Devices hold CE mark documentation, WHO-GMP compliance, and full technical documentation packages required by Canadian importers for regulatory filing and Health Canada MDEL compliance verification.
Yes. Our Levin’s tubes feature a continuous, co-extruded radio-opaque stripe made with high-concentration medical-grade Barium Sulfate (BaSO4). This ensures vivid contrast visibility under abdominal X-ray or fluoroscopy, allowing clinicians to verify placement before starting suction or feed delivery.
We accommodate both full-container direct factory shipments and flexible pallet-level orders for established regional medical distributors in Ontario. Standard OEM custom packaging cycles typically range from 20 to 30 days, with air freight or sea freight routes directly servicing the Port of Montreal or Toronto logistics hubs.
Our lateral eyes are cut using high-speed automated precision dies followed by thermal polishing. This process ensures smooth, burr-free lateral port edges that will not scratch nasopharyngeal tissue during insertion or harvest tissue fragments during withdrawal.
Absolutely. We specialize in custom OEM contract manufacturing. Purchasing departments can specify custom placement of depth indicators, custom tube lengths, specialized connector colors, or private-branded packaging configurations tailored to regional tender specifications.
Contact our international export engineering desk today for volume pricing, factory direct samples, technical specifications, and regulatory compliance dossiers.